Modern Classic SLRs Series :
Canon F1 -
Booster T Finder (Operation)


Basic operation manual for setting up the Booster T Finder
Download this page for your future reference.

Click on icon to proceed

Tony Kano (Ex-Regional Head (Asia),
Richard Yeow (Division Head-Malaysia) of Canon Marketing
who has shared so much enthuasism for making this site possible for all Canon Fans.

| Main Index Page |

1. Insert the Silver Oxide battery

6. after deciding on the composition, turn the eyepiece shutter towards 'Close' setting

2. Set the appropriate film speed on the camera

7. Push the metering lever for stopped down metering

3. Attaching the Booster T finder to the camera

8. Turn the shutter dial or aperture ring to adjust the meter needle to the meter index

4. Set the metering switch at 'ON' position

9. When the shutter button is pressed, the timer works for auto-exposure.


to Canon Booster T Finder Main Index Page


to Canon F-1 main Index Page
Photography in Malaysia  

5. Lift the timer switch knob, turn the shutter dial and switch to the slow side

About this photographic site.

| Message Board | for your Canon F-1(n) SLR camera(s)