Flash Synchronization
To remove the lens from the camera, press down on the lens release button and
turn the lens clockwise until the black dot on the lens barrel lines up with the
black dot on the front of the camera body. The lens will slip off easily.
To mount a different lens, place it in position in the camera's bayonet mount, align
the black dots and twist the lens barrel counterclockwise until the lens locks into
place with a click.
Note: With the 6mm f/5.6 Fisheye-Nikkor and 10mm f/5.6 OP Fisheye-Nikkor lenses,
the mirror must be locked in the "up" position before mounting.
Caution: A body cap should
be placed over the lens opening to protect the interior of the camera whenever the
lens is removed for any length of time. The lens opening should not be exposed to
bright sunlight when the lens is removed, especially when the camera is loaded with
film. When the lens is handled or stored separately, front and rear lens caps should
be used to protect the lens surfaces and interior from dust and damage.
|