Nikon FE Series SLR camera(s) - Message Board/Guestbook

1. From : nelson (nelbo81188@attbi.com)
Url : http://
Date : 10:31 AM Friday 04 October, 2002

i have a nikon Fe sreial #4299302 and i have a setting on the exposure one of they go 1/1000, 1/500 , 1/250, 1/125, 1/60, 1/30, 1/15, 1/8, 1/4, 1/2, then 1/1, 2/1, 4/1, 8/1 then m90 w hich is where my question is "what is M90 and what does it do?"

2. From : George T. Fabbiani (gtfsr@yahoo.com)
Url : http://
Date : 01:02 AM Sunday 29 September, 2002

I am interested in selling my FE2 and some accessories and can't find a site to help with fair pricing. I do not want to do Ebay. Any suggestions?
Thanks
GTF

3. From : Lars (owner-nikonrepair@yahoogroups.com)
Url : http://
Date : 02:54 PM Tuesday 17 September, 2002

Ronald - shorting the two pins in the remote socket of the MD-12 will fire the camera. I do not think the connectors can be obtained by themselves. Read more @ http://www.maxwell.com.au/club/lr/product/lr12-3/remote.html

4. From : Alex Leishman (leishman37@hotmail.com)
Url : http://
Date : 09:57 AM Tuesday 17 September, 2002

I have an FE2 and I am looking for a repair manual, I have had the camera at a repair shop twice in the last three years and it lasts three or four months an out of action again I treat it with respect I also have a Pentax it gives me no trouble, so I would be very gratful if somebody could help me

5. From : Ronald (email@brenzef.com)
Url : http://www.brenzef.com
Date : 03:32 AM Friday 13 September, 2002

Hi,
I use an FE camera with an MD12 winder.
I am looking for a electronic release cable, or an address where I can buy the connector so I can make one myself.
If someone has an cable layout it would be a good start.

Thanks,
Ronald

6. From : Jaejoon Lee (jjoon@u.washington.edu)
Url : http://
Date : 03:32 PM Monday 09 September, 2002

Hello! I'm new to here...great site.
I'm looking for a zoom lens like 28-200mm for my Nikon FE
which is handed down from my father.
I'm wodering if auto-focus zoom lens can be fitted to it.
I'd appreciate it if you answer me.

7. From : Joshua (varble26@hotmail.com)
Url : http://
Date : 11:31 PM Wednesday 28 August, 2002

Help. I have an FE that has sat in my camera bag un-used all summer. The light meter doesn't work. I replaced the batteries and yet the needle remains at the bottom of the meter. If some one has any idea of how to fix this problem please please e-mail me. Thank you.

8. From : Jason Sober (bsober@swbell.net)
Url : http://
Date : 02:14 AM Tuesday 27 August, 2002

Looking for a shutter speed control for my Nikon FE. I have had the camera in the repair shop for the last 2 months only to discover that they could not find a replacement part.Any help would be great. Thanks.

9. From : Don (dfgriff57@cox.net)
Url : http://
Date : 08:20 AM Sunday 25 August, 2002

Does anyone have the instruction manuals for the Nikon FE2 and SB15 in pdf format they could send me. Thanks

10. From : Malcolm Rye (malcolm.rye@virgin.net)
Url : http://
Date : 02:57 AM Friday 23 August, 2002

I had a NIKON FE with MD12 (plus Nikon F) given to me last year when my employer was changing to digital. The were going to throw them away! Both are in mint condition, and with a 28mm, 50nn, 55mm (macro),and 135mm,plus I have a very satisfying kit.
On a few occasions, the shutter has locked. BUT If the FE is used without the motor drive, and the film has been moved forward, Fitting the MD12 at this point causes the lock. So, ifworked without the drive (for silence), leave winding on until the MD12 is put on and then apply power. - Well it works for me.
I have looked at the new FM3, but for over £500.00 I will stick to the FE and F.
Regards to all

PAGE | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | 60 | 61 | 62