|
The Canon T-90 System |
|
Modern
Classic SLRs Series : |
|
The Canon T-90 System |
|
Modern
Classic SLRs Series : |
The Canon T-90 was the last model that uses FD-mount prior to the shift to the autofocus EF EOS system. It hardly lasted a year since its inception but what an impact it has created on the design of future SLR. Every inch a classic, despite after more than 15 years, this camera is still hard to replicate even by today's standard. It was also widely acclaimed as one of the true Classic camera of modern times. Here comes a common Message Board designed specifically for Canon T90 SLR model - this is especially useful when you realize ALL Canon FD mount SLRs have long been discontinued you may require a public forum for common support and sharing mutual knowledge or experience among many of you. This Site has proved to be quite popular and I am quite happy to see these effort was not wasted and special thanks to ALL the volunteered Site Maintainers of this Message Board. Enjoy.
This site is specifically created for this great SLR cameras by Canon. Please don't mail me other than constructive suggestions or rectifying mistakes found in this site, thanking you in advance. Since this is a non-profitable resource site - The developer of this site reserves the rights to censor or delete any inappropriate, unrelated, misleading or excessively hostile messages posted herein. If your intention is to dispose your Canon cameras or its accompanying accessories or looking for a used model or any of its system components, please use a separate section with a higher volume of traffic Free Trade Zone site instead. The Photography In Malaysia has no Guestbook on its own, because it is an integral part of the MIR site. But if you want to leave a note on your experience visiting this site, you may use the MIR's Guestbook at another new window by clicking on the Guestbook Link.
Post a Message to the Message Board
A
kind reminder: Please do
not misuse
of this message board system.
Back to Main Index Page of
Canon T-90 SLR Camera Website
1. From : TomR (trigilano@netscape.com)
Url : http://
Date : 01:14 AM Friday 24 June, 2005
flam, Is it possible that you accidentally pressed the spot metering button while in spot metering mode? That would cause the VF display to remain on for about 30 seconds. TomR2. From : Ken D (kdurling@comcast.net)
Url : http://
Date : 10:06 PM Wednesday 22 June, 2005
Flam - The T-90 VF info only stays on during the half press. You learn to count clicks and do fancy things with two fingers. :-) Ken
3. From : flam (flamant@monsieurflamantrose.com)
Url : http://
Date : 12:27 PM Wednesday 22 June, 2005
T90 viewfinder info i looked at a couple of T90s the other day and wasn't sure if the viewfinder readouts for the apertaure and the shutter speed were meant to stay on for 30 seconds or so after pressing the shutter release half way. can anyone tell me what is the norm? thanks4. From : Ken D (kdurling@comcast.net)
Url : http://
Date : 09:46 PM Saturday 11 June, 2005
Meant to wwrite: "*It* would probably help . . ." :- Ken5. From : Ken D (kdurling@comcast.net)
Url : http://
Date : 10:32 PM Friday 10 June, 2005
Terry - I would probably help if you told us what part of the world you're in. There's a great guy in Reno, Nevada whom many USA users have used. Ken6. From : Terry Pommer (terrypommer@telus.net)
Url : http://
Date : 01:56 PM Friday 10 June, 2005
My beloved T-90 has developed the error message when ever to shutter button is pushed. Where can I safely send my camera for repair and at what cost? Thankyou.7. From : Michiel (michiel_schoenmaeckers@hotmail.com)
Url : http://
Date : 07:02 PM Friday 03 June, 2005
Question Who has an idea to find instruction manual for Metz Mecablitz 32CT8? Thanks in advance, Michiel8. From : Michiel (michiel_schoenmaeckers@hotmail.com)
Url : http://
Date : 07:00 PM Friday 03 June, 2005
Question I have a canon T90 and an adaptor SCA 312/2 AF (and a mecablitz 32CT8), is this functional on T90?9. From : mark wahlster (awahlster@aol.com)
Url : http://
Date : 12:06 AM Tuesday 31 May, 2005
A couple of us here are trying to work out some of the details in the production of the Canon 35mm f2.8 Tilt & Shift lens and would appreciate any serial numbers and build codes you might be able to provide us. You can post them here or email them direct to me. If your worried about giving out your serial numbers just us X's for the last number or if your really paranoid the last two! The serial number is found on the under side of the aperture ring (look from the rear) The build code (which may be rubbed off) is in black ink stamped on the rear of the mounting ring. THANKS for any help you can provide. Mark W.10. From : George Waller (georgewaller@lineone.net)PAGE | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | 60 | 61 | 62 | 63 | 64 | 65 | 66 | 67 | 68 | 69 | 70 | 71 | 72 | 73 | 74 | 75 | 76 | 77 | 78 | 79 | 80 | 81 | 82 | 83 | 84 | 85 | 86 | 87 | 88 | 89 | 90 | 91 | 92 | 93 | 94 | 95 | 96 | 97 | 98 | 99 | 100 | 101 | 102 | 103 | 104 | 105 | 106 | 107 | 108 | 109 | 110 | 111 | 112 | 113 | 114 | 115 | 116 | 117 | 118 | 119 | 120 | 121 | 122 | 123 | 124 | 125 | 126 | 127 | 128 | 129 | 130 | 131 | 132 | 133 | 134 | 135 | 136 | 137 | 138 | 139 | 140 | 141 | 142 | 143 | 144 | 145 | 146 | 147 | 148 | 149 | 150 | 151 | 152 | 153 | 154 | 155 | 156 | 157 | 158 | 159 | 160 | 161 | 162 | 163 | 164 | 165 | 166 | 167 | 168 | 169 | 170 | 171 | 172 | 173 | 174 | 175 | 176 | 177 | 178 | 179 | 180 | 181 | 182 | 183 | 184 | 185 | 186 | 187 | 188 | 189 | 190 | 191 | 192 | 193 | 194 | 195 | 196 | 197 | 198 | 199 | 200 | 201 | 202 | 203 | 204 | 205 | 206 | 207 | 208 | 209 | 210 | 211 | 212 | 213
Url : http://
Date : 04:49 PM Sunday 29 May, 2005
FD300mm F4 - rattle... normal? I have noticed that my cherished FD300mm telephoto seems to have a slight rattle which I cannot be sure has not always been there. As far as I am aware the lens works ok (photos do not seem to exhibit any obvious exposure problems) but I noticed that if I gently shake it there is a light internal rattling near the camera end of the lens - I suspect it is near the diaphragm. Looking through the end of the lens the diaphragm blades appear to be undamaged. My FD75-210 zoom does not seem to make same noise... ideas? I have never dropped this lens.
| Post a Message to the Message Board |
Archived Messages of Previous Postings
001-050 | 051-100 | 101-150 | 151-200 | 201-250 | 251-300 | 301-350 | 351-400 | 401-450 | 451-500 | 501-550 | 551-600 | 601-650 | 651-700 | 701-750 | 751-800 | 801-850 | 851-900 | 901-950 | 951-1000 | 1001-1050 | 1051-1100 | 1101-1150 | 1151-1200 | 1251-1250 | 1251-1300Maintainers for Canon T-90 Message Board:
Terry Carraway (TCarraway@compuserve.com), Mickey Oberman (mickeyobe@rogers.com); Kaipin (kaipinc@tm.net.my), Tom Rigilano (trigilano@yahoo.com) & Irwin (Dr Strangeluv)Back to Main Index Page of
Canon T-90 SLR Camera WebsiteBack to Message Board of Canon T-90 SLR Camera(s)
Disposing/Looking
for New/Used photographic equipment
on Canon T-90 camera
Administrator Page
Home - Photography in Malaysia
Copyright © 2007. leofoo ®. MIR Web Development Team.
Version three Re-Programmed by our in-house Fairuz Sulaiman, improved from original version by Ang Seng Leong ,Yeak Ngai Siew, Rizal Yahya, Halimaton Yahya (Members of the MIR Web Development Team)MIR Guestbook On-line. Developed & Copyright@ 2001 by MIR Communications Sdn. Bhd.